深圳市知用电子有限公司
ShenZhen ZhiYong Electronics Co., Ltd.
High Frequency AC current probe CP1015
High Frequency AC current probe CP1015
Bandwidth(-3dB)80Hz~60MHz
Rising time ≤5.83ns
Max continuous current 15App(5.3Arms) 
Current Transfer Ratio 100mV/A
Intermediate Frequency Accuracy ≤3%
浏览次数:559
说明书: 产品说明书
1. Summary
CP1015 current probe is used for AC current testing. The current under test can reach peak value of 15A, low frequency bandwidth 80Hz, high frequency bandwidth 60MHz. Its standard BNC output port can be connected to the oscilloscope of any brand. The clamp design can proceed testing easily without disconnect the circuit under test. CP1015 has been largely used in testing like motor drive, inverter, power switch and avionics. 
 
Product Specification
Bandwidth(-3dB) 80Hz~60MHz
Max continuous current 15App(5.3Arms)
Max current VS Frequency(Fig. 1)
Max Pulse Current 250Apk (Fig 2) Can’t surpass 500A*us or 5.3 Arms, or the magnetic core could saturate and unable to zero.
Max DC saturation current 0.5A
Intermediate Frequency Accuracy ≤3%
Current Transfer Ratio 100mV/A
Delay time 16ns
Rising time ≤5.83ns
Terminal Load 1MΩ
Input Impedance (Typical) 0.04Ω(100kHz),0.14Ω(1MHz)
Clamp Diameter Approx. 5mm
Output Port BNC
Output cable length 1.5m
Safety level
Safety Level
300V CATI
Operating Temperature and Humidity 0℃~50℃,80% or less
Storing Temperature and Humidity -40℃~70℃,80% or less
Operating Altitude 2000m
Size ( Length* Width * Height) 216*115*45mm
Weight Approx. 150g